Beko DPU 8360w not heating

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko DPU 8360w not heating

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 3, 2015 at 10:24 am #86558
    jimluxe
    Participant

    any ideas please!
    Beko DPU 8360w heat pump dryer not heating
    to be honest the only problems i have had on these before are belts and pulleys, so if anybody can point me in the right direction it would be much appreciated

    November 3, 2015 at 10:53 am #432146
    Seamy
    Participant

    Re: Beko DPU 8360w not heating

    Check door & compressor NTCs.
    Compressor overload.
    Check compressor windings etc.

    November 7, 2015 at 10:37 am #432147
    jimluxe
    Participant

    Re: Beko DPU 8360w not heating

    thanks for that Seamy
    NTCs are ok and the compressor is running so assuming must be a leak going on.
    think i will bail on this one!
    you think with modern tec it would show a fault code though or go to error instead of just keep running.

    November 7, 2015 at 11:10 am #432148
    Seamy
    Participant

    Re: Beko DPU 8360w not heating

    Heat pump dryers only generate quite low heat, filters are critical.
    Check that they are clear, test at NTC near compressor, should read 50c I think, if its much lower there could be a system problem.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.