Zanussi W/M E52, Motor or PCB

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi W/M E52, Motor or PCB

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 5, 2015 at 5:42 pm #86582
    pmb
    Participant

    John Lewis / Zanussi washing machine machine, Jlbiwm 1402 91452821600
    Fault code E52 which is no signal from tacho,
    Tacho seems OK. I was expecting the magnet to have come off
    Is it the PCB or the motor
    Anyone had this.

    November 5, 2015 at 9:24 pm #432258
    aqualectric
    Participant

    Re: Zanussi W/M E52, Motor or PCB

    pmb wrote:
    Fault code E52 which is no signal from tacho,
    Anyone had this.

    E52 code is motor brushes worn out. I have had that fault code on Lux stuff at least once every week….. 😯

    HTH,

    Steve.

    November 6, 2015 at 8:04 am #432259
    pmb
    Participant

    Re: Zanussi W/M E52, Motor or PCB

    Brushes was the first thing I checked

    November 6, 2015 at 1:25 pm #432260
    Criscold
    Participant

    Re: Zanussi W/M E52, Motor or PCB

    I would check motor connector on board J7 and motor from the control board connector, if ok would go for the board.
    Let me know if you req diagram.

    Colin

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.