Hotpoint Aquarius MP640 not working

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hotpoint Aquarius MP640 not working

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • November 14, 2015 at 11:58 am #86685
    hagbag69
    Participant

    Press On switch, no response.
    Switch out 13A fuse with working 13A fuse from kettle, no change, washer fuse works in kettle, Switched back.
    Plug washer into another (working) power socket, no change
    Removed lower back panel, removed black rubber assembly, removed coins, stickers, labels and bits of wood(!). Cleaned assembly and drainage hose with white vinegar. Reassembled, no change.
    A week later I noticed that when plugged into wall and I flick the wall switch, the red LED display flashes up briefly and disappears. Any help greatly appreciated!

    November 14, 2015 at 1:07 pm #432748
    iadom
    Moderator

    Re: Hotpoint Aquarius MP640 not working

    No such model number, however the main pcb on these Indesit machines is very prone to this sort of failure. Can sometimes be the mains filter or the connections between the main circuit board and the console pcb.

    November 16, 2015 at 3:18 pm #432749
    hagbag69
    Participant

    Re: Hotpoint Aquarius MP640 not working

    My bad, the model is WD640.

    Any tips/links to check the mains filter?

    November 16, 2015 at 3:37 pm #432750
    iadom
    Moderator

    Re: Hotpoint Aquarius MP640 not working

    A simple continuity test ( with the mains plug removed from wall socket ) is all that is required.

    November 23, 2015 at 8:39 pm #432751
    123amo456
    Participant

    Re: Hotpoint Aquarius MP640 not working

    Hi there, exactly the same has happened to me today, and I was hoping for the results of your fix… Any help gratefully received…

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.