- This topic has 6 replies, 4 voices, and was last updated 21 years ago by
.
-
Posts
-
Can anyone helpwith this problem.The element has been checked ok.Also the thermostats on element housing have been checked ok.I will be grateful for any help….
Cheers…………………………..
Re: Candy CIC 60 Tumble Dryer No Heat (element OK)
I forgot to add there is supposed to be another thermostat somewhere but I can’t find it anywhere………
Re: Candy CIC 60 Tumble Dryer No Heat (element OK)
I have not actually done any Candy dryer repairs, but the Hoover dryers produced by Candy have a small microtemp just inside the dryer housing that is prone to failure, sometimes caused by blocked filters, kinked vent hoses or stopping the dryer whilst it is still hot.
after isolating from the mains you can use whatever method you used to check the stat continuity on the microtemp. This is a small device similar to a resistor that sits inside the heater assembly.
Re: Candy CIC 60 Tumble Dryer No Heat (element OK)
Have you any idea where this other stat may be as there is nothing inside the element housing only the 2 stats on top of it.
Re: Candy CIC 60 Tumble Dryer No Heat (element OK)
On the fan housing, it requires a complete dismantle to get at it though 🙄
Dave.
Re: Candy CIC 60 Tumble Dryer No Heat (element OK)
Thankyou for your advice I will have a go tomorrow.Nothing to lose have I.It is only 14mths old as well .I will let you know how I get on Cheers…
- You must be logged in to reply to this topic.