- This topic has 4 replies, 3 voices, and was last updated 21 years ago by
.
-
Posts
-
Help, All is well until drain & spin. Have checked the filter at the front, no blockage. Water is just sat in the drum, it will not empty on any programme. Any suggestions would be appreciated.
Many thanks
SteveRe: Hoover six express wdm130
Steve,
If when you set it to a spin cycle and you cannot hear the pump running, then it almost certainly has a blocked or jammed pump impellor. If the pump runs OK but no water drains from the drum, then the likelyhood is that a coin or something is blocking the sump hose where it joins the narrow pump body.
A closer look at the pump and sump hose may be your next move 😉
:plug: DO PULL THAT PLUG OUT FIRST THOUGH :lesson: :zap:
Martin
Re: Hoover six express wdm130
It could be a foreign body jamming the pump. Remove the mains plug , drain as much water as you can by holding the hose down into a washing up bowl or similar, arm yourself with a few towels and using large pliers or molegrips take the hoses off the pump and examine the inside of the pump for obstructions, coins, bra wires etc, etc, etc.
OOPS, not quite quick enough of the mark, sorry. 😀
Thanks iadom & Martin.
Spot on, i have found a dyson vacum cleaner filter.
Ever felt stupid ! this could have cost me a minor fortune in a call out.
Many thanks
Steve
- You must be logged in to reply to this topic.