- This topic has 2 replies, 2 voices, and was last updated 10 years, 3 months ago by
.
-
Posts
-
wtc84100gb/01 container light comes on after 5 or 10 mins container is at the bottom and is only half full not seen one of these before cant see how to access any float switch or is this more likely to be an ntc fault.
any bosch experts out there to point me in the right direction?thanks wilf
Re: bosch cond dryer
go here put your Enr in
http://www.bosch-home.co.uk/store/spareparts/search
on page 5 of breakdown see item 0510
my guess is the left side will have to come off. you need to take front panel off the access some of the screws
Dave
Re: bosch cond dryer
just for future ref I’ve been back to this and changed front ntc more out of hope than science but that was last week it ran ok then and I told the customer to get back if anything wrong . hav’nt heard anything so I assume its ok. measured the resistance one against the other as I fitted it and got about 1K difference .
fingers crossed wilf
- You must be logged in to reply to this topic.