- This topic has 3 replies, 3 voices, and was last updated 10 years, 2 months ago by
.
-
Posts
-
Hi, I have a customer with a Miele W865. When spin is selected the rinse light flashes. I replaced the carbon brushes one of which was well worn the other still with life left on it. Tried selecting spin again with same results, rinse light flashing. Is there a reset for this machine or would I be right in condemning the control module? Regards Taff
Re: Miele W865 Error Code
there is a fuse on the control module
did the brushes seem worn ?
if no prob the reversing relay its a common fault which also blows the fuse .
fuse is a small red or black cylinder approx 1cm high soldered into the boardDave
Re: Miele W865 Error Code
rinse light flashing is a no motor action detected fault. No re set for it as it means fault still exists. Its easy to re fit the motor brush module with the pins out of line with the contacts on the field coils so check with a meter for readings between the pins: 2 for the armature, 3 for the fields, 2 for the toc, and 2 for the tacho. If no reading on the fields then you may have not lined the pins up. If all ok down there then its the power pcb clipped to the back of the facia. some threads on here about repairing them but never done one myself.
- You must be logged in to reply to this topic.