Phillips-Whirlpool AWG997PH – parts list required

Home › Forums › Public Support Forums › General Enquiries And Questions › Phillips-Whirlpool AWG997PH – parts list required

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 15, 2016 at 1:07 pm #87322
    brianr
    Participant

    Hello,
    I would appreciate help with this washer-drier from 1991.
    Does anyone have a parts list or exploded view of the machine so that I can identify which particular part I need to replace.
    At present, the drier function is heating the incoming air excessively and it’s cooking the clothes.
    There is a two-terminal t’stat in the air conveyor, near the heater and fan, which I suspect is short-cct. I will not know its rating until I open the cabinet once more to test it.
    Also, are there any other t’stats in the drier cct. as I understand there will be a safety t’stat and a cycling t’stat?

    Thanks.

    January 15, 2016 at 3:36 pm #434495
    PaulG
    Participant

    Re: Phillips-Whirlpool AWG997PH – parts list required

    That model was issued with a safety modification on the dryer element unit. It involved cutting into the silver paper insulation and installing new thermostats and a bracket.

    January 15, 2016 at 11:04 pm #434496
    brianr
    Participant

    Re: Phillips-Whirlpool AWG997PH – parts list required

    Thanks PaulG,
    I had heard that they were prone to overheating with so much kit inside the cabinet. No evidence of a modification on this machine however.
    Have you any idea where I could get a parts list or diagram from?

    Regards,

    January 16, 2016 at 1:42 pm #434497
    PaulG
    Participant

    Re: Phillips-Whirlpool AWG997PH – parts list required

    I don’t, sorry. But I vividly remember the modification.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.