bosch washer dyer wvt12840gb/04

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › bosch washer dyer wvt12840gb/04

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • January 18, 2016 at 1:48 pm #87356
    chris45
    Participant

    Washer dryer stopped, I thought it finished the wash. Tried to spin – machine won’t move. Tried normal wash – machine attempts to start but then stops displays fault code E01 and activates the drain pump. I suspect water valve coil. Washer has 3 valves – surprised all 3 are gone. Any suggestions what could be wrong

    January 18, 2016 at 2:29 pm #434595
    Martin
    Participant

    Re: bosch washer dyer wvt12840gb/04

    Possible open circuit in the dryer valve coil?

    January 18, 2016 at 4:08 pm #434596
    chris45
    Participant

    Re: bosch washer dyer wvt12840gb/04

    Martin I have test the valve coil using multimeter and all 3 are fine.

    January 18, 2016 at 4:29 pm #434597
    chris45
    Participant

    Re: bosch washer dyer wvt12840gb/04

    Martin, just to clarify – the dryer coil is one of the water valves?

    January 18, 2016 at 5:04 pm #434598
    Martin
    Participant

    Re: bosch washer dyer wvt12840gb/04

    Yes! :tup:

    January 18, 2016 at 5:15 pm #434599
    chris45
    Participant

    Re: bosch washer dyer wvt12840gb/04

    Martin,
    I have tested all the water value coils all working correctly. Machine will still not filling water at all

    January 18, 2016 at 5:45 pm #434600
    Martin
    Participant

    Re: bosch washer dyer wvt12840gb/04

    Errr? Is there a ‘water block’ hose fitted to your machine? That’s a fill hose that fits on the stopcock with a large block on the end or has it just got a standard PVC fill hose?

    January 18, 2016 at 6:08 pm #434601
    chris45
    Participant

    Re: bosch washer dyer wvt12840gb/04

    Martin, the hose has a stopcock on the end where it attaches to the mains. I did detached the hose from the machine end and open the tap with hose in the sink and there was significant water pressure – water splash all over

    January 18, 2016 at 6:23 pm #434602
    chris45
    Participant

    Re: bosch washer dyer wvt12840gb/04

    Martin, its not a standard hose

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.