- This topic has 3 replies, 2 voices, and was last updated 10 years, 2 months ago by
.
-
Posts
-
I have just bought the above dishwasher. It’s plumbed in correctly. I filled the salt dispenser with water then salt. I start a wash cycle and the wash light comes on. It sounds like it’s beginning to fill with water. Then after 2 minutes the end light comes on and the salt light flashes.
I have tried unplugging. Power off. Nothing changes this result.
I’m in the UAE and so cannot call an indesit engineer out.Re: Indesit DFG15B1
make sure it is a filling sound
when unit starts it will pump for a bit, then start to fill
also if the fill is very slow unit will time out and stop
Dave
Re: Indesit DFG15B1
Hi Dave. Had the dishwasher replaced with a new one. Now it seems this one doesn’t heat the water!
No codes. Runs program as normal. Just dirty cold dishes when finished.
I’m now assuming company received a duff batch of dishwashers from indesit!
- You must be logged in to reply to this topic.