Gorenje dishwasher GV60010 TOC

Home Forums Trade Technical & Spare Parts Forums Trade Technical Enquiries Gorenje dishwasher GV60010 TOC

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #87497
    allan73
    Participant

    Could some kind person advise me if a Baumatic TOC pt: BMTX672050280029 would be a safe replacement for the original on this unit. Many thanks in advance

    Allan

    #435050
    ELDAR59
    Participant

    Re: Gorenje dishwasher GV60010 TOC

    Hi Allan, do you know if the values are the same? Can you see the values on the toc?

    Cheers.

    #435051
    ELDAR59
    Participant

    Re: Gorenje dishwasher GV60010 TOC

    Just had a quick look on Connect and it looks like the value on the Baumatic part is slightly lower than the Gorenje one.
    The toc is self resetting so it would probably do, although if it kept tripping, it would throw up an error code.
    If I remember correctly on these, if the wash pump was a little weak, it could lead to the toc tripping regularly too.
    Maybe worth checking the wash pump?

    Cheers.

    #435052
    admin
    Keymaster

    Re: Gorenje dishwasher GV60010 TOC

    Hi

    Common fault was cured by changing the pressure switch. If you added approx 1 ltr more water into it the pump flowed the water correctly unto the top spray arm.
    Gorenje replaced all stock of pressure switches to the new on after 4 weeks to changing every part and the fault was still there. Whilst watching the wash while it was stripped down you could see the water flow not fully going up the rear pipe..added 1ltr of water cured it and stopped the thermostats failing.

    Bryan

    #435053
    allan73
    Participant

    Re: Gorenje dishwasher GV60010 TOC

    Thanks for replies, I’ll check the temp rating and waterflow to top arm

    Allan

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.