- This topic has 3 replies, 2 voices, and was last updated 10 years, 2 months ago by
.
-
Posts
-
Hi,
This is a washing machine and tumble dryer. It works for a while and then it stops suddenly. For example, it always stops after 5 seconds of running the “Pump out” program (C). Although during those 5 seconds I can see that there’s water coming out of the drain hose as normal and then it stops with flashing lights.
The bottom lights are all flashing. The program lights on the side are:
Lock: Red solid
End: Green solid
Drying: Amber solid
Spin: Amber solid
Rinse: Off
Wash: OffI don’t know what they mean and I couldn’t find it in the Help & Advice of this forum neither.
The PCB board visually looks clean and fine, no capacitor bulging on the top.
The drain hose and the pump are clear of debris, the pump spins freely.Thanks,
DanielRe: Hotpoint WDL540 Aquarius problem
The error codes are HERE
Not easy to follow from that page I’ll grant you, your lights are 1+2+3+4 reading those codes from right to left.
You have error code F15, possible heater relay fault.
Re: Hotpoint WDL540 Aquarius problem
I couldn’t find any problem (visually) of the drying unit. It’s like this http://www.ebay.co.uk/itm/Hotpoint-Heat … SwJkJWh-sy
Is this the part that I should change?
- You must be logged in to reply to this topic.