Indesit washer/dryer does not drain

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Indesit washer/dryer does not drain

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 11, 2016 at 2:42 pm #87567
    saroop
    Participant

    Hi, I have an Indesit washer/dryer IWDC6143. The pump drains for about 2 seconds then stops. I have ran the pump independently on 240v and it works fine. I changed the control PCB and it does the same thing. It pumps out 240v to the pump for a couple of seconds then drops out to a few volts. Any ideas?, main fascia PCB or some sort of safety cut out switch somewhere???. Oh, and no blockages.

    February 11, 2016 at 2:50 pm #435289
    iadom
    Moderator

    Re: Indesit washer/dryer does not drain

    Pressure switch, dryer side ntc??

    February 11, 2016 at 5:37 pm #435290
    saroop
    Participant

    Re: Indesit washer/dryer does not drain

    Thanks, will take a look 🙂

    February 11, 2016 at 6:30 pm #435291
    Andy jones
    Participant

    Re: Indesit washer/dryer does not drain

    Check motor brushes as well. They can throw up similar fault

    February 11, 2016 at 8:17 pm #435292
    saroop
    Participant

    Re: Indesit washer/dryer does not drain

    Thank you for the replies. The pressure switch wire had burnt out and was hanging off. Nice one iadom.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.