- This topic has 1 reply, 2 voices, and was last updated 10 years, 1 month ago by
.
-
Posts
-
My gorenje d72325 is acting strange. When I close door and turn knob to set timer machine comes on before I press start and drum turning wrong way, also not heating. If I press start again it seems to reset and turn the right way(clockwise) and start heating and then if I open door it reverts to other way(anti clockwise) and stops heating. It will not stop completely until I turn knob back to zero. Any ideas on this would be great. Thanks.
Re: Gorenje d72325 not working right
Hi,
maybe this information can be helpful:
On condenser dryers and under certain operating conditions condensation process (humidity air) can generate water in the place between the fan and the electric heater.
Condensation is generated at a specific conditions – temperature difference between process air and the ambient temperature on the back heater cover.
After some drying cycles (water under the fan) operating fan pushing the water on the el. heater.
Consequently, there are main switc off-FI voltage protection.Greeting!
- You must be logged in to reply to this topic.