Hot point Aquarius wml520 out of balance?

Home › Forums › Public Support Forums › General Enquiries And Questions › Hot point Aquarius wml520 out of balance?

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 4, 2016 at 1:35 pm #87791
    Davesnout
    Participant

    I made the mistake of moving (shuffling it backwards) my hot point Aquarius wml520 whilst it was on the wash cycle, not spin.

    It immediately cut out, lost all power and now refuses to turn on.

    There is power to the socket and to the lead. Is there an out of balance switch on these and, if so, how is it reset?

    March 4, 2016 at 2:19 pm #436024
    iadom
    Moderator

    Re: Hot point Aquarius wml520 out of balance?

    No such switch, you must have moved it rather robustly. If you are lucky it may just have dislodged some internal wiring, worst case is that something could have shorted out and blown the main pcb. 🙁

    March 4, 2016 at 7:06 pm #436025
    Davesnout
    Participant

    Re: Hot point Aquarius wml520 out of balance?

    Thanks for that iadom. Guess I’ll open it up and see if anything obvious is loose.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.