Had four of these in the last 2 weeks.
Dishwasher drains, fills then nothing. Sounds like the heater is coming on as well. Just no circulation motor.
Got an awful feeling this is going to be a very common fault as every kitchen round here seems to be a Howdens kitchen!
So far tried replacing circuit board and capacitor, but no joy.
Anyone else had this problem. It seems to only happen on the integrated ones.
Presuming it is filling but no pulses received back from flowmeter to p.c.b. Check the small fine cables (usually blue) from flowmeter to board, they usually break in loom at bottom of door.