Fagor FUS61161T

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Fagor FUS61161T

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 11, 2016 at 1:35 pm #87841
    bendy
    Participant

    Like the enquiry of a couple of years ago , i to have one that will not switch on pump and condenser valve on drying cycle. stats , heater, wiring all ok. Have fitted a new main pcb , still the same. any ideas ? Bendy.

    March 12, 2016 at 1:45 am #436162
    electrofix
    Moderator

    Re: Fagor FUS61161T

    not had a pump problem but had a few that would not turn on valve

    found a work around but not the fault

    set dryer cycle and start it
    wait 10 secs or so till cycle starts
    turn machine off at the plug
    wait till machine stops and all lights go off
    then switch socket back on

    I found water valve then came on and machine works dryer normally

    Dave

    March 12, 2016 at 10:24 pm #436163
    melec
    Participant

    Re: Fagor FUS61161T

    Dodgy edge connector on that module ??
    Take each one off and check individual pins etc try a contact cleaner in case oxydised
    Sounds like a shared nuetral failing intermittantly

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.