samsung rsh1 with blown fuse in mains filter pcb

This topic has 2 replies, 2 voices, and was last updated 10 years ago by DDA.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
March 16, 2016 at 11:28 am #87871

DDA
Participant

i have a samsung rsh1dtmh1xeu with a blown fuse on the mains filter pcb. Is there any common faults causing this and anything i need to check before trying to replace, or do i need to check all components.

any help will be appreciated.
Anthony

March 16, 2016 at 1:33 pm #436260

chezza
Participant

Re: samsung rsh1 with blown fuse in mains filter pcb

I used to find it was almost always one of the internal bulbs or the icemaker solenoid that caused these to blow, though I have had the odd one that was never obvious or problematic after replacing

March 22, 2016 at 6:30 pm #436261

DDA
Participant

Re: samsung rsh1 with blown fuse in mains filter pcb

cheers for that. any idea what the ratings the heater fuse needs to be (i think there 12.5a but not to sure). they haven’t gone but just ant to order them for stock at the same time in case.
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.