- This topic has 4 replies, 4 voices, and was last updated 10 years ago by
.
-
Posts
-
Installed and plumbed in yesterday.
The eco light has come on flashing fleet which suggests overfilling but there is no water in the machine itself.
I’ve turned it on and off and it keeps doing it and randomly beeps at me also..any advice on resetting it so I can at least get it back to standard modeDid you find an answer for this? I am having the same problem with mine, same model. It’s not new. But I can’t reset it to run another cycle
when this fault happens it normally floods the base of the machine and lift a float . this float is underneath where the motor and works are. if you tilt the machine backwards slowly !! I sress slowly as do it too quick and the water can get places it should not be. you need to give it time to leak out on the floor
once the water is out, try it again. If the fault repeats then you have a leak in a hose or similar and you have to find it
Dave
- You must be logged in to reply to this topic.