getting beko wm74135 into diagnostic mode

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › getting beko wm74135 into diagnostic mode

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 23, 2016 at 7:49 pm #87944
    gandh1
    Participant

    How do i do it? These are same pcb as wmb71231 so dont have a onoff switch separate from program dial. Need to see why this is aborting at the end of the wash without progressing to rinse. Likewise when you do a rinse separate it wont progress to spin yet it happily spins on its own, and if you do a rinse it rinses fine. Just wont do them all tpgether in one wash program

    March 23, 2016 at 8:45 pm #436532
    electrofix
    Moderator

    Re: getting beko wm74135 into diagnostic mode

    Close the machine door if opened. Switch to service mode. To switch to service mode, move program selection switch to CANCEL position. Then, while pressing START/PAUSE button, bring the program selection switch to the first program in the clockwise direction. Front door will be locked in the service mode.

    Dave

    March 24, 2016 at 2:03 am #436533
    gandh1
    Participant

    Re: getting beko wm74135 into diagnostic mode

    Cheers for that dave, got your email too ta! After replacing solenoid it seems the only other option is pcb 🙁 ho hum.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.