Zanussi ZDT12011FA dishwasher pump reset

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZDT12011FA dishwasher pump reset

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 2, 2016 at 2:39 pm #88008
    aroffauz
    Participant

    Hello
    I have a Zanussi ZDT12011FA which had overfilled and brought on the antiflood switch and drain pump. I fitted the pressure sensor modification 4055346060 nevertheless the drain pump still runs continuously even though the base is clear of water and the antiflood microswitch is not made.
    Am I missing something
    Thanks Declan 🙂

    April 2, 2016 at 4:33 pm #436722
    electrofix
    Moderator

    Re: Zanussi ZDT12011FA dishwasher pump reset

    have you checked the triac on the pcb for short circuit

    pump is connected to b1 and b2 on the board

    Dave

    April 3, 2016 at 8:02 pm #436723
    aroffauz
    Participant

    Re: Zanussi ZDT12011FA dishwasher pump reset

    Hi Dave– thanks for your help
    I had another look at it and found I had not fitted the contact on the new pressure sensor correctly 😳
    all tested ok since
    I appreciate your help
    Many thanks Declan 🙂

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.