Fisher Pakayl Dish Drawer

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Fisher Pakayl Dish Drawer

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • April 9, 2016 at 11:06 am #88072
    RAW Electrical
    Participant

    Drawer dish washer with no lcd display, the touch buttons for adjusting settings not working ? It was stuck on eco mode now it’s stuck on middle setting, is this a new controller ? Never had this before

    April 9, 2016 at 12:01 pm #436928
    electrofix
    Moderator

    Re: Fisher Pakayl Dish Drawer

    has it got a child lock ??

    Dave

    April 9, 2016 at 2:02 pm #436929
    RAW Electrical
    Participant

    Re: Fisher Pakayl Dish Drawer

    Yes but it is not on, the machine works fine and does a full cycle just can’t change the load setting

    April 9, 2016 at 3:44 pm #436930
    electrofix
    Moderator

    Re: Fisher Pakayl Dish Drawer

    I had similar problems with those buttons and It was a positioning problem from memory
    cant quite remember how it fits but check the buttons, and the sensors for them underneath, and how they connect to the pcb

    Dave

    April 9, 2016 at 4:15 pm #436931
    RAW Electrical
    Participant

    Re: Fisher Pakayl Dish Drawer

    Ok thanks Dave will check it out , from memory the two side plugs twist and come out to release it? it’s got me as a new member but joined this group years ago but it wouldn’t let me log in so just set up as a newbie. Thanks again

    Richard

    April 10, 2016 at 9:53 am #436932
    RAW Electrical
    Participant

    Re: Fisher Pakayl Dish Drawer

    Hi Dave, spot on mate removed the controller and the circuit board sits on top, found a lot of residue across the circuit board some contact spray and a cotton bud and all clean and working again.

    Richard

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.