Maytag mwa10149 F22 fault code?

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Maytag mwa10149 F22 fault code?

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 12, 2016 at 2:44 pm #88093
    jonboy2016
    Participant

    Hi guys,

    Been on with this a week now, my mrs is going crazy, basically she went to do a load of washing and it never started, red service light flashed and on the display it said F22

    So i googled the problem… I think i read the first thing that was displayed and it was something about the door lock which seemed right due to it has intelisense that normally spins the drum before it fills with water, only this isn’t happening now, so to me it did seem like it thought the door was open,

    I messed about with the door lock pushing it too and from and couldn’t get it working, so i bought a new door lock hoping this would fix the problem

    NOPE – still doesn’t work i’ve tested the connections without pressing start using a electric screwdriver, power to it, looks to be no problem up top neither, ive manually pushed the switch across and it still wont fire

    No matter how hard i look i cannot find a fault code list for this machine! So i’ve a feeling i’ve repaired or attempted to repair something that wasn’t even bloody broken in the first place,

    All help is appreciated

    Thanks

    John

    April 12, 2016 at 2:55 pm #436991
    jonboy2016
    Participant

    Re: Maytag mwa10149 F22 fault code?

    Oh sorry by the way

    Press start with door shut, door open light does go off, so my feeling is F22 doesn’t mean the door latch is faulty, re-going over the post i read before i even bought the door lock and its for a maytag but a completely different machine 🙁

    May 8, 2017 at 8:12 pm #436992
    allanpeden
    Participant

    Re: Maytag mwa10149 F22 fault code?

    I have the same problem with a Maytag MWA10149 washing machine, fault code F22 and the wash program wont start. Did the issue with the machine in this post get resolved? As per the previous user I have already replaced the door interlock switch but the problem remains. I would appreciate any help.


    Thanks
    Allan

    May 8, 2017 at 8:46 pm #436993
    electrofix
    Moderator

    Re: Maytag mwa10149 F22 fault code?

    F22 is listed as a MCU communication error

    so its a data error from the main control board and the motor control board

    all you can do is check wires for damage and remove and replace all multiplugs with small wires in case its a bad connection including the motor connections
    After that it may come down to replacing boards

    Dave

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.