- This topic has 6 replies, 3 voices, and was last updated 9 years, 11 months ago by
.
-
Posts
-
Hi
Complaint was a fault occurred and the sequence of lights indicated emptying problem.
I started the machine up, it filled, circulated the water ok and heated.
I then cancelled the program as per instructions and afterwards could not select a program as it was stuck in the cancel program state, ie the ‘end’ lights where steady ON – not flashing.
Your thoughts would be appreciated, is there a reset procedure?
Thanks Laurence
Re: Smeg DF614WE Dishwasher Stuck On Cancel See Photos
usually caused by slight earth faults, try pulling the plug on the circ pump and see if that clears it. Also would look at the alt valve for slight leaks across the micro switch. Its something that effects freestanding dishwashers more than integrated.
Re: Smeg DF614WE Dishwasher Stuck On Cancel See Photos
All of what Mark said but also try the capacitor on the circ pump ,a slight earth fault charges the capacitors on the pcb and then stops the cancel function
Re: Smeg DF614WE Dishwasher Stuck On Cancel See Photos
Thanks Mark and Lawrence.
Not sure what you mean by alt valve, Mark? Is this just short for ‘salt’ :o).
Thanks again.
Laurencer
Re: Smeg DF614WE Dishwasher Stuck On Cancel See Photos
Alt valve – alternating valve
Alternates between top and bottom basket
Re: Smeg DF614WE Dishwasher Stuck On Cancel See Photos
Lawrence wrote:Alt valve – alternating valve
Alternates between top and bottom basket
If its got one…..
- You must be logged in to reply to this topic.