- This topic has 1 reply, 2 voices, and was last updated 9 years, 11 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Unit completely dead but power to the PCB
The Fuse Resistor on the live in has no continuity.Board its self is perfect with no blown tracks or other components visible
Before I replace the board is there anything that I should be checking to ensure new board does not blow.
Meggered everything I can and all seem OK
Many thanks
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.