Electrolux EW1006F Inlets which way?

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Electrolux EW1006F Inlets which way?

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • April 30, 2016 at 10:17 am #88218
    Zedhead
    Participant

    Anyone know which way around the water inlets connect? The manual says they are colour coded but this seems to have faded away. The issue is that since replacing the drum spider the machine seems to be running a lot hotter. I am not sure but supect it could be I have connected it up the wrong way around thus feeding hot water to the cold inlet?

    Any advise appreciated

    April 30, 2016 at 11:45 am #437376
    iadom
    Moderator

    Re: Electrolux EW1006F Inlets which way?

    When you pull the washing out as soon as it has finished it should feel cold, if it feels warm then swap the hoses.

    April 30, 2016 at 11:53 am #437377
    Zedhead
    Participant

    Re: Electrolux EW1006F Inlets which way?

    Thanks iadom, are you saying the final rinse should be cold fill only?

    April 30, 2016 at 1:15 pm #437378
    iadom
    Moderator

    Re: Electrolux EW1006F Inlets which way?

    ALL rinses are cold fill only.

    April 30, 2016 at 1:25 pm #437379
    Zedhead
    Participant

    Re: Electrolux EW1006F Inlets which way?

    That’s it then many thanks

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.