beko bwi643 dishwasher

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › beko bwi643 dishwasher

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 3, 2016 at 10:26 pm #88246
    simonb
    Participant

    beko bwi643

    by simonb ยป Wed May 04, 2016 7:54 am

    Beko dishwasher customer complaining of the machine is finishing with water in the base.

    swapped the pump and checked for blockages on first visit

    second visit i noticed the machine powered off after approx 5 mins, i checked all connections to the module and also the wiring loom on the bottom of door and seem ok… on off push switch tested and seems ok.

    i cant pull the machine out due to floor tiles so i cant check the mains input at the back and supply.

    any ideas? any common faults on these?
    Have you noticed that all the people in favour of birth control are already born?
    — Benny Hill
    User avatar
    simonb
    Valued Contributor
    Valued Contributor

    Posts: 394
    Joined: Fri May 28, 2004 10:00 am

    May 4, 2016 at 12:39 pm #437468
    electrofix
    Moderator

    Re: beko bwi643 dishwasher

    think you need to check supply. on some programmes about 5 minutes is when the heater kick in and any bad socket will give up at that point

    Dave

    May 4, 2016 at 1:27 pm #437469
    simonb
    Participant

    Re: beko bwi643 dishwasher

    thanks dave and yes that sounds likley

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.