Zanussi ZDF 14001SA fill problems.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZDF 14001SA fill problems.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • May 17, 2016 at 8:11 am #88325
    tinfish
    Participant

    I’m having problems with this machine (PCN 91151310400). I replaced the pressure switch a year or so ago and I was initially called back as they didn’t think it was heating, but I can’t even get the machine to run to find out if there is another problem.

    You select any program, it starts, drains, starts filling and the drain pump comes back on. It will fill/drain for a few minutes then beep.

    There are no leaks, I tried another pressure switch on it, but no change.

    Any ideas would be greatly appreciated.

    Grant

    May 17, 2016 at 11:20 am #437688
    electrofix
    Moderator

    Re: Zanussi ZDF 14001SA fill problems.

    have sent you some reading

    hope it helps

    Dave

    May 18, 2016 at 8:53 am #437689
    tinfish
    Participant

    Re: Zanussi ZDF 14001SA fill problems.

    thanks

    Grant

    May 21, 2016 at 9:29 pm #437690
    SL
    Participant

    Re: Zanussi ZDF 14001SA fill problems.

    There is a modification for the pressure sensor on these, order a new sensor and you get a kit to fit.

    May 22, 2016 at 2:17 pm #437691
    bazza500
    Participant

    Re: Zanussi ZDF 14001SA fill problems.

    Yes , but if he’s already tried another pressure sensor and it hasn’t cured it then the mod isn’t going to cure the fault.

    May 24, 2016 at 8:56 pm #437692
    SL
    Participant

    Re: Zanussi ZDF 14001SA fill problems.

    You must fit the air trap kit, fitting another sensor on its own will fail.

    May 24, 2016 at 9:01 pm #437693
    bazza500
    Participant

    Re: Zanussi ZDF 14001SA fill problems.

    You’re correct it will fail, but it would have cured the fault until it failed in a few months.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.