Neff/Bosch s51e50x1gb/01

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Neff/Bosch s51e50x1gb/01

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 30, 2016 at 8:36 pm #88426
    Johnnyboy
    Participant

    This one fills, heats, recirc motor and drain pump work, but half way through a cycle it just stops (with water in it), open the door close it again and it continues. AArrgghhh its the time waiting for it to stop thats bleeding me dry.
    Cheers John

    May 31, 2016 at 1:38 am #438055
    aqualectric
    Participant

    Re: Neff/Bosch s51e50x1gb/01

    Usually a poorly fitted decor door panel pulling the door out of line or the dishwasher cabinet askew in the cupboard fitting. It can also be the decor door hitting the outer cupboard carcass before the door is completely closed. These machines use a magnetic door switch and a catch that sometimes allows the door to open slightly on the hot wash or rinse….. the pressure can be just enough to push the door open the critical amount. Shut the door and it resumes – usually never repeating when you need it too. 😳
    Cure – adjust decor door or cabinet to get a really positive click when the door shuts. The door also mustn’t foul on the cabinet sides. If that still doesn’t correct it then new catch assembly (under lid) or mag sensor inside door (where every other dishwasher has a time proven latch and microswitch unit).

    HTH,

    Steve.

    June 2, 2016 at 5:23 pm #438056
    Johnnyboy
    Participant

    Re: Neff/Bosch s51e50x1gb/01

    Thanks for that, I shall tell her to Jam the door closed with a chair to see if that helps, would explain why it never happened on a pre wash.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.