Siemens IQ300 WM14Q390GB

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Siemens IQ300 WM14Q390GB

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • June 7, 2016 at 4:36 pm #88496
    stourbridgear
    Participant

    Hi all,

    Could someone please help with this problem. Have a Siemens IQ300 WM14Q390GB which had an E43 error. Carbons replaced, and error cleared (Although it did show E63 before turning off after reset?) When cycle is started the machine fills, but the drum only sporadically moves and doesn’t spin. I’ve got a feeling it’s the control board, does anyone have experience of this? Thank you.

    John.

    June 7, 2016 at 4:46 pm #438355
    electrofix
    Moderator

    Re: Siemens IQ300 WM14Q390GB

    maybe

    since the machines drum changes direction you could have a blown track for the spin direction but machine will still turn the other way

    Dave

    June 7, 2016 at 5:24 pm #438356
    stourbridgear
    Participant

    Re: Siemens IQ300 WM14Q390GB

    Thanks Dave it doesn’t full turn either way, it probably turns about a 1/4.

    June 7, 2016 at 6:14 pm #438357
    electrofix
    Moderator

    Re: Siemens IQ300 WM14Q390GB

    did you check for tacho output ?

    Dave

    June 7, 2016 at 6:32 pm #438358
    stourbridgear
    Participant

    Re: Siemens IQ300 WM14Q390GB

    No I didn’t – thought this would give me a different fault? Can you explain more please?

    June 7, 2016 at 6:41 pm #438359
    electrofix
    Moderator

    Re: Siemens IQ300 WM14Q390GB

    just thinking outside the box

    wondering if unit starts to move motor and fails if it does not get impulses. may give you a different fault but cant be sure

    have no access to Siemens error codes so have learned to try everything and check everything
    one person on here seems to have Bosch tech access and maybe Siemens is Nomad

    Dave

    June 7, 2016 at 7:24 pm #438360
    stourbridgear
    Participant

    Re: Siemens IQ300 WM14Q390GB

    Makes sense Dave…thank you. Perhaps Nomad will read this and chip in. Cheers for your help.

    John.

    June 8, 2016 at 7:57 am #438361
    stourbridgear
    Participant

    Re: Siemens IQ300 WM14Q390GB

    Hi again, the error code that briefly flashed up after reset was E26 not E63.

    June 10, 2016 at 8:40 pm #438362
    stourbridgear
    Participant

    Re: Siemens IQ300 WM14Q390GB

    Just to help anyone who may look this up in the future, it was a tacho problem…a refurbed motor cured it.
    John.

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.