- This topic has 2 replies, 2 voices, and was last updated 9 years, 10 months ago by
.
-
Posts
-
Working on this dryer.
Had worn drum support roller. Also packed with fluff everywhere. Now all cleaned and new front seal fitted.
When switched on it motors for about 5 seconds & stops on any setting (no sign of heater being activated).
With heater disconnected it motors no problem.
Heater and stats test OK.
Found instructions for a diagnostics mode and get 1 red flash then 1 green flash at the start button.
The customer had just reported noisy operation as the problem.
Hoping someone can help
Thanks in advance,
TomRe: zanussi zde 47100 dryer
The “Diagnostics prog” I was using.
Program selector @ off.
Press & hold start & option button to its left.
Now move program knob 1 click clockwise while holding buttons until led lights begin to flash. Then release buttons.
Turn selector 9 more clicks clockwise without stopping.The light in the Start button was found to give 1 red flash then 1 green flash.
I have now found by moving the knob backwards a variety of tests seem to be carried out at various setting points. including heater operation. Also different patterns of flashing light codes are indicated.
Hoping someone can help with more information regards interpreting the indications.
tom
- You must be logged in to reply to this topic.