- This topic has 1 reply, 2 voices, and was last updated 21 years ago by
.
-
Posts
-
One of the door hinges/ supports has jumped off with a bit of a noise, I can pull it out against the spring, but am not quite sure how to slack off the spring/gain access. I have looked at the manual – chocolate teapot comes to mind! The Model is LI 62 UK and it is built in. Any polite suggestions welcome.
Re: Ariston LI 62 Door jumped off
It is possible that the hinge has jumped off the pivot it rests on…many dishwashers rely on the weight of the door and the spring tension to hold it on.
You can lift it back on by holding the door nearly closed and lifting gently against the spring tension and ‘feeling’ for the correct position to relocate it.
If the door became unhooked by unusual forces being applied (moving the machine by holding the open door for example) the refitting it is no problem but if it came off during normal operation then something may have broken in which case you need an engineer to sort it for you. (Repairs@)
- You must be logged in to reply to this topic.