BEKO product code SN 140220 – changing door direction

Home › Forums › Public Support Forums › Help And Support › Fridge And Freezer Forum › BEKO product code SN 140220 – changing door direction

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • July 3, 2016 at 8:22 am #88692
    Haramo
    Participant

    Dear

    I have read the manual but nothing about changing the door from direction.

    and also the handle that is used to open the doos, is at on eside a little bit loose, I need to fix it.

    But don’t know what to do, I’m afraid I will break it.

    same for the door, I did seen that I have on the other side the option to put the door theere. even at the top of the door there is a cable (I assume for the light).

    ADDED: there is water in a white box , just above the black boiler (or how do you call that part that contains the gas?).
    Is it possible to remove that white box to get rid of the water? I tried to take it out but it’s to firm.

    It”s a defroist fridge, is it possible I don’t have to remove the water?

    July 3, 2016 at 8:32 am #439027
    electrofix
    Moderator

    Re: BEKO product code SN 140220 – changing door direction

    that looks like a serial number would need the model number to see which unit you have

    Dave

    July 3, 2016 at 8:34 am #439028
    Haramo
    Participant

    Re: BEKO product code SN 140220 – changing door direction

    model number: L60400NEA+

    July 3, 2016 at 10:03 am #439029
    electrofix
    Moderator

    Re: BEKO product code SN 140220 – changing door direction

    cant see that either

    i typed this number into google and it should come up if it is valid and it doesn’t

    there should also be a commercial code number normally beginning with a 7

    Dave

    July 3, 2016 at 10:15 am #439030
    don
    Moderator

    Re: BEKO product code SN 140220 – changing door direction

    Hi


    Your IP address suggests you are posting from Belguim 🙂


    Your model is not listed on
    http://be.beko.com/ perhaps it’s an older model you have bought or it’s not the right number as Google does not reference it either.


    To answer your questions do not remove the white plastic tray. the heat from black motor will evaporate the water you do not need to do anything to this.


    As I cannot find any instructions for your appliance have a look at this link for an English model http://downloads.beko.co.uk/bekoupload/ … PW_APS.pdf page 10 and 11 are the pages you need. The principle is the same for whichever country you are in.


    HTH 😀


    Don

    July 4, 2016 at 7:31 pm #439031
    Haramo
    Participant

    Re: BEKO product code SN 140220 – changing door direction

    product code: 7254648716

    I will give the manual a try . thanks, and yes I’m form belgium

    July 4, 2016 at 7:35 pm #439032
    Haramo
    Participant

    Re: BEKO product code SN 140220 – changing door direction

    I almost forget,I also mentioned that the part that is used to open the door is a little bit loos.

    How can I fix it?

    July 5, 2016 at 7:33 am #439033
    don
    Moderator

    Re: BEKO product code SN 140220 – changing door direction

    As we don’t know your model it’s hard to say. Usually the handle is fixed by two screws which have little covers over them on the handle, just pop these off with a thin flat blade to reveal the screws.


    Don

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.