Flavel Milano 60 Glass Hob Lid Springs

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Flavel Milano 60 Glass Hob Lid Springs

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • July 17, 2016 at 8:09 am #88803
    mike30
    Participant

    Hi there its me again, can anyone help with the fixining of the Hob Lid
    Springs (2 off). The two springs are of very thick spring materials and I imagine very difficult to compress (why so heavy duty ???)
    Cannot find any diagrams or any information on these components, the model of the cooker is as follows.

    Flavel Milano 60 (DCG ML6S)

    Cannot download any info for this cooker. Any help would be greatly appreciated.

    Regards,
    mike30 :eeek: :eeek: :eeek:

    July 17, 2016 at 8:27 am #439430
    kwatt
    Keymaster

    Re: Flavel Milano 60 Glass Hob Lid Springs

    I think it’s these ones used on that cooker:

    https://shop.ukwhitegoods.co.uk/082506195-oven-spring

    http://shop.ukwhitegoods.co.uk/082506723-oven-spring

    K.

    July 17, 2016 at 9:00 am #439431
    Lawrence
    Participant

    Re: Flavel Milano 60 Glass Hob Lid Springs

    They are very easy to fit but ensure they go in correctly handed right to right and left to left.
    Slot the ends in the key way in the bracket and the Spring is already pre tensioned

    July 18, 2016 at 1:15 pm #439432
    mike30
    Participant

    Re: Flavel Milano 60 Glass Hob Lid Springs

    Hi Lawrence, thank you for your prompt reply. Unfortunately I seem to have lost the plot. When I assemble the spring assy. prior to fitting
    into the glass lid holder, it leaves the spring 180deg. out of line with the parent hole in the end fitting. I realise that the spring has a right/left orientation but to have to tension the spring through 180deg is not right.However during strip there was tension on the springs (but not 180deg) Can I send you some ” jpeg” images of the components for better clarification.

    regards.
    mike30.

    e-mail michael_john@ntlworld,com

    July 25, 2016 at 12:52 pm #439433
    mike30
    Participant

    Re: Flavel Milano 60 Glass Hob Lid Springs

    Hi Lawrence, still cannot complete a satisfactory outcome to fitting these glass hob springs. Can you please advise on the following query,realise that there is a left & right orientation, but after fitting do the springs help to close the glass lid (this action closes gas valve). And like wise when the lid is open will also open the valve. Or are the springs meant to close one side and open the other.

    Regards, mike30………..

    July 31, 2016 at 7:46 am #439434
    mike30
    Participant

    Re: Flavel Milano 60 Glass Hob Lid Springs

    New purchased spring assemblies LH & RH fitted with no problems, lid contact with shut off valve checked ok. But now lid will not stay upright. Both spring assemblies want to shut the lid which closes the shut off valve (logically correct) but also wants to close the lid.
    Can you help.

    mike30….

    July 31, 2016 at 11:40 am #439435
    kwatt
    Keymaster

    Re: Flavel Milano 60 Glass Hob Lid Springs

    Are you sure you have them the correct way around?

    It’s all I can think on and, without seeing it, really hard to envisage.

    K.

    August 1, 2016 at 9:23 pm #439436
    kaibart
    Moderator

    Re: Flavel Milano 60 Glass Hob Lid Springs

    if you can read the data plate there will be a number starting with 7 this is how you can find correct part

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.