Bosch heating and long cycle

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Bosch heating and long cycle

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 7, 2005 at 12:16 pm #8891
    admin
    Keymaster

    My SGS5312 stopped heating a year back, so swapped to household hot water supply.
    Now a new fault: the wash cycle stays on indefinately, even though 0 is displayed.
    Checked the control PCB and sure enough the blown track on the relay connection was visible! Made good the joint, but it hasn’t cured the problem (although it may have fixed the heating problem, as the element is OK)
    The reset doesn’t work, so I guess my PCB has another fault besides the relay. Blown programmme chip?

    What are my options? Can I source a new PCB at reasonable price?
    Can I fit a MKII pcb without the weak track?

    April 7, 2005 at 12:35 pm #130973
    Martin
    Participant

    Re: Bosch heating and long cycle

    guest wrote: Blown programmme chip?

    Yes that is the problem I’m afraid. 🙁

    You could try sending the module to this company for repair : –
    http://www.qer.biz/servReps.htm

    Martin

    April 7, 2005 at 1:19 pm #130974
    admin
    Keymaster

    Re: Bosch heating and long cycle

    Thanks – I’ll tryQER

    April 7, 2005 at 7:57 pm #130975
    superfix
    Participant

    Re: Bosch heating and long cycle

    Are you sure it’s not just the outlet pump running?

    Base may be flooded and activated flood s/w.

    Get some old towels behind m/c and tip it back to about 45 degrees.If water pours out you have an internal leak and will probably require an engineer.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.