Zanussi DX6452 not heating

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Zanussi DX6452 not heating

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 14, 2016 at 5:05 pm #89042
    kwiatks
    Participant

    Zanussi DX6452 is not heating anymore but runs through the programs OK. I’m fully prepared to change parts over but am unable to get find a service manual online anywhere.

    I see I can get a Heating element -> http://www.espares.co.uk/product/es5445 … lId=553010 and also a Sensor -> http://www.espares.co.uk/product/es5677 … lId=553010 but wish to know how I diagnose what the issue is before having to purchase any spare parts.

    Any help appreciated.

    August 14, 2016 at 11:39 pm #440174
    Gerry85
    Participant

    Re: Zanussi DX6452 not heating

    Common on this model for a dry or burnt solder connection on the heater relay located on the main pcb

    Isolate dishwasher from the mains supply!!

    -remove door skin
    -remove front panel
    -remove star head screw from main pcb
    -clip out pcb from front panel
    -at this point take a photo of wire locations
    -removed all wires from pcb
    -remove pcb from plastic housing
    -look closely at the soldered connections on rear of board
    -if there is a bad solder simply re-solder it

    Check this first b4 ordering an element.

    G

    August 22, 2016 at 7:23 am #440175
    kwiatks
    Participant

    Re: Zanussi DX6452 not heating

    Gerry,
    I did what you suggested and it worked !!! – that’s easily saved me £ 100 and a lot of time taking the dishwasher apart – many thanks

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.