Hotpoint WDD960 F15 error with Flashing LED’s

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hotpoint WDD960 F15 error with Flashing LED’s

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • August 15, 2016 at 10:57 am #89049
    Shudavcalledapro
    Participant

    Hi

    Can anyone help me with this? I have the F15 error code but I also have all 5 LED’s flashing and the LED on the start/pause flashing too.

    I have changed the main control module as first thought it was the dryer heater relay. No change.

    The machine gives this error even when trying to do a quick spin programme, after pumping out. So it doesn’t seem related to the dryer at all.

    Any thoughts anyone?

    Thanks

    August 15, 2016 at 1:04 pm #440190
    iadom
    Moderator

    Re: Hotpoint WDD960 F15 error with Flashing LED’s

    F15 is listed in the official manual as ‘possible’ heater dryer relay fault which isn’t the best of help.

    Machine will self test so error codes for dryer can/will show during other cycles.

    August 15, 2016 at 5:03 pm #440191
    Shudavcalledapro
    Participant

    Re: Hotpoint WDD960 F15 error with Flashing LED’s

    OK thanks for that. If I meter out the dryer heater coil what result should I expect?

    August 15, 2016 at 5:20 pm #440192
    iadom
    Moderator

    Re: Hotpoint WDD960 F15 error with Flashing LED’s

    Approx 43?

    August 15, 2016 at 5:27 pm #440193
    Shudavcalledapro
    Participant

    Re: Hotpoint WDD960 F15 error with Flashing LED’s

    Well how stupid do I feel? A lesson to anyone reading this check the basics first!!!!! I went all out with the error code and bought a replacement module….spent time removing old one and installing new one…..during which I had a wiring crisis that I had to get round after pulling cables out of a connector……

    I just went to check the resistance of the element and only then did I notice the broken cable on one of the terminals…..

    This is the simplest job to fix that will take only minutes……temporarily attached cable and the machine spins with no error codes……

    Hmmmm what a plonked Rodney!!!!

    August 15, 2016 at 6:18 pm #440194
    iadom
    Moderator

    Re: Hotpoint WDD960 F15 error with Flashing LED’s

    Or should have called a pro. 😉 😆

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.