speedqueen les37awg3018 com dryer

Home Forums Trade Technical & Spare Parts Forums Trade Technical Enquiries speedqueen les37awg3018 com dryer

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #89131
    deltra
    Participant

    hi all, no heat on machine,tested everything as best I could and all ok. switched it on and it heated for a minute or so then stopped. so heater is ok,but there is a 5/6 tag thermostat on the outlet side,dont know what this does??? could be that($99) any help appreciated.

    #440450
    electrofix
    Moderator

    Re: speedqueen les37awg3018 com dryer

    this is a bit of guess work and a bit of experience

    they use a similar stat on maytag dryers

    the two outside connection will prob be the ones you want to look at. i would say these are the main load to the heater
    the centre 2 brass connector will either be
    1 a resistor to preheat the stat or ( my best guess)
    2 an NTC if the unit uses electronic control

    this system is used on maytag dryers

    the last terminal is probably a changeover contact from the main set

    meter through from left to right see if you get a connection

    Dave

    #440451
    deltra
    Participant

    Re: speedqueen les37awg3018 com dryer

    Thanks dave,any idea for best place to get spares?

    #440452
    electrofix
    Moderator

    Re: speedqueen les37awg3018 com dryer

    i would go to google and Ebay as i find sometimes its as cheap to get things sent from the states as long as the price is cheap enough to avoid vat and import duty charges

    ring JLA but do a bit of research as they can be a bit dear sometimes

    Dave

    #440453
    deltra
    Participant

    Re: speedqueen les37awg3018 com dryer

    Cheers dave

    #440454
    EFS
    Participant

    Re: speedqueen les37awg3018 com dryer

    The part number is on the sticker which makes the job easier.

    Steve

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.