AEG KB9810E-M Combi oven

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG KB9810E-M Combi oven

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 14, 2016 at 8:44 am #89290
    SWERV
    Participant

    Hi Guys,
    I recently fitted a power board to this machine because the old one had a surface mount fuse on it that had blown and had a couple of blown tracks. I checked everything over and checked the door lock operation and it all seemed fine. Tested the machine and all was working.
    They have been using it for just over a week all ok and I get a call yesterday that it has gone pop. I’ve been out and looked and the same thing has happened. She said that it went pop when she pressed start. I have checked everything again and for the life of me cannot see any problem.
    Has anyone come across this before?, I’m very reluctant to fit another board.
    Sorry for the long post!
    Merv

    September 14, 2016 at 9:15 am #440929
    electrofix
    Moderator

    Re: AEG KB9810E-M Combi oven

    you need to look at the blown track and see where the current flow is

    post a picture of the blown side of the board

    also post the Pnc number as there are over 30 ovens with the same model and i will see if i can find some tech info

    Dave

    September 14, 2016 at 12:59 pm #440930
    SWERV
    Participant

    Re: AEG KB9810E-M Combi oven

    Hi Dave,
    thanks for your reply. The pnc number is 944270763/01.
    I didn’t get a picture of the blown side of the board. The track leads to the left hand side door switches.
    Merv

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.