- This topic has 2 replies, 2 voices, and was last updated 9 years, 6 months ago by
.
-
Posts
-
One for the Samsung boys 🙂
I’ve got one of these I’m back to in a few days to fit a new evaporator panel and also a new heater.
It’s had the mods etc Defrost sensor moved etc but still has an old style evaporator cover that has badly rusted and blown.
When I took the panel off at the bottom were two metal “supports” and a burnt out piece of plastic.
https://1drv.ms/i/s!AkhS_gobKY2tiuAA_cPaSn-mSKpm0A
https://1drv.ms/i/s!AkhS_gobKY2tiuABtN2CjcZ_1B_4uQHeater
https://1drv.ms/i/s!AkhS_gobKY2tit9_mqnyT_Oglu2F3Q
My question is how does the two metal support and the plastic bit go toghether to support the heater?Re: Samsung RSH1NHMH Fitting a new heater
Hi
Those 2 arrow heads clip onto the bottom of the heater. Then onto the bottom of the evaperator.The botch up silver foil covers up the crappy plastic liner that the old heater that was too powerful burnt. One clip one way the other the opposite direction.
Bryan
- You must be logged in to reply to this topic.