AEG Oko Lavamat 86741 Update C1 Error

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › AEG Oko Lavamat 86741 Update C1 Error

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • September 19, 2016 at 1:10 pm #89339
    Narinderpal
    Participant

    Hi,

    Got a similar problem to the one in the link below, same make and model too.

    post311669.html#p311669

    Got 13 yr old AEG Oko Lavamat model 86741 Update. Noticed recently in last month or so machine sometimes gives C1 error at the start of a wash only. We only ever use 40 deg Cotton / Linen wash. If machine does stop with C1 error, then pressing start again usually gets the wash going again and so far it has not stopped for the rest of the cycle. So far I have only cleaned the soap tray and the water inlets to the soap tray. From the link above, pressure hose and valve are the things to check. Did pull out the machine to get the lid off but it has star screws for which I don’t have screw driver. Happy to get the star screwdrivers if I can get some guidance on how to check the pressure hose and valves.

    Any help greatly appreciated.

    Regards,

    Narinderpal

    September 19, 2016 at 1:29 pm #441081
    kwatt
    Keymaster

    Re: AEG Oko Lavamat 86741 Update C1 Error

    Same problem, same machine then it’ll be the same valve required but do check the PNC number is the same as if not, it *may* be different. Probably not but, you never know.

    The screws will be Torx no doubt, this sort…

    http://shop.ukwhitegoods.co.uk/mis204-t … driver-set

    K.

    September 19, 2016 at 4:42 pm #441082
    Narinderpal
    Participant

    Re: AEG Oko Lavamat 86741 Update C1 Error

    Hi,

    Thanks for that. Much appreciated.

    Will the PNC number be on the valve itself or …?

    Regards,

    Narinderpal

    September 19, 2016 at 5:30 pm #441083
    kwatt
    Keymaster

    Re: AEG Oko Lavamat 86741 Update C1 Error

    No it’s on the rating plate inside the door.

    K.

    September 20, 2016 at 6:28 pm #441084
    Narinderpal
    Participant

    Re: AEG Oko Lavamat 86741 Update C1 Error

    Ahh.

    PNC is 914 002 405 00.

    Thanks

    Narinderpal

    September 23, 2016 at 8:42 am #441085
    Narinderpal
    Participant

    Re: AEG Oko Lavamat 86741 Update C1 Error

    Hi,

    Do you have the valve for PNC 914 002 405 00?

    Regards,

    Narinderpal

    December 30, 2016 at 2:01 pm #441086
    Narinderpal
    Participant

    Re: AEG Oko Lavamat 86741 Update C1 Error

    Hi,

    Just checking if you have the valve for PNC 914 002 405 00 please? Only C1 error no happening at the start of almost every wash.

    Regards,

    Narinderpal

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.