Bosch WAB28261GB/01 E16

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch WAB28261GB/01 E16

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • September 27, 2016 at 7:55 pm #89413
    Twoten
    Participant

    I have had a call to the above machine. Having looked a the forum I believe the E16 fault indicates a door interlock fault.

    I have replaced the door lock but am not sure how to reset this model.

    Can someone let me know how to do this please.

    Thanks,

    Keith.

    September 27, 2016 at 8:53 pm #441314
    nomadPaul
    Participant

    Re: Bosch WAB28261GB/01 E16

    I think it’s selector switch to 6 o’clock, hold spin speed button and one click clockwise.

    September 27, 2016 at 9:26 pm #441315
    Twoten
    Participant

    Re: Bosch WAB28261GB/01 E16

    Thanks nomadPaul,
    I tried this as it is the only method I know but it didn’t work so wondered if there’s another way for this model?

    October 3, 2016 at 3:47 pm #441316
    Twoten
    Participant

    Re: Bosch WAB28261GB/01 E16

    Just to update this post.
    On this machine I have managed to obtain the following:
    1) Close the door (The following operational sequence must take place after switching on the appliance)
    2) Set program selector to OFF position
    Wait for at least 2s
    3) Set program selector switch to position 15 while the Start/Pause button is pressed until display is active
    4) Release Start/Pause button
    All remanent errors will be reset

    October 3, 2016 at 9:50 pm #441317
    nomadPaul
    Participant

    Re: Bosch WAB28261GB/01 E16

    Funnily enough , I went to one today and found its this old method of resetting faults/entering test programme. I wish they’d make their bloomin minds up about which method to use !

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.