zanussi zjd1219

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zanussi zjd1219

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • October 6, 2016 at 7:19 pm #89510
    HotDog
    Participant

    This
    machine is coming up with e10 fault which i know is a fill fault not a fault i have come across before tested on 40deg delicate it did 1st fill then 2nd fill then just pumped and circulated the water no wash action i am thinking maybe blockage in p/pipe or faulty p/switch i then tried on 40deg cotton and got wash action problem is i couldnt get machine out due to some idiot tiled up to feet any any one know the most likley common cause of this fault dont think valve as it did the double fill or is perm any one from 3

    October 10, 2016 at 11:22 am #441581
    KentDom
    Participant

    Re: zanussi zjd1219

    Had a similar problem, changed pressure switch and checked motor etc. Found PCB on top had blown. They can be repaired though, if you can get the machine out!

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.