AEG 76639

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG 76639

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • October 12, 2016 at 4:40 pm #89569
    LittleMan
    Participant

    Hi this washing machine is intermittent the fault is when you set the program it will run until the last 23 minuets then just stops you have to turn the machine off and select a program and hope it will finish any one have any clews .
    Les

    October 12, 2016 at 7:12 pm #441751
    Martin
    Participant

    Re: AEG 76639

    Does it display an error code?

    If the answer is no then you will have to access the diagnostics cycle in order to determine if an error was detected.

    What have you checked so far?

    October 12, 2016 at 9:28 pm #441752
    LittleMan
    Participant

    Re: AEG 76639

    Have tested heater motor pumps and inlet valves every thing tests out ok but one in every 5 washes will stop

    October 13, 2016 at 6:40 am #441753
    Martin
    Participant

    Re: AEG 76639

    …….and my first question asked of you?

    October 13, 2016 at 7:37 am #441754
    LittleMan
    Participant

    Re: AEG 76639

    No

    October 13, 2016 at 12:14 pm #441755
    Martin
    Participant

    Re: AEG 76639

    LittleMan wrote:No

    Ah shucks! But then it is an AEG after all (short for Amasses Engineers Guesswork) :rolls:

    Well let me know if you need help accessing the diagnostic sequence. 🙂

    October 13, 2016 at 4:27 pm #441756
    LittleMan
    Participant

    Re: AEG 76639

    Thanks for your help but as the machine could be about 15 years old and most part not available they are going to call it a day and get a new one.
    thanks again for your help Les

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.