WJD1667W error code E20

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › WJD1667W error code E20

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • November 3, 2016 at 9:52 am #89756
    Mongoose57
    Participant

    Hi all. Ok here goes. I have a Zanussi washer/dryer WJD1667W which throws up error code E20. After many months of research it seems to be a drainage fault. I have had the machine in bits and cleaned 99{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of all pipes and orifices and removed a lot of built up gunk. Both pumps stripped, cleaned and checked. No loose wires found.Washing part is fine. Tried the dryer the other day, fine. Tried it again, E20. Turned it off and on again no code dried fine. Ok experts over to you. Cheers. Russ.

    November 3, 2016 at 2:11 pm #442396
    Martin
    Participant

    Re: WJD1667W error code E20

    E20 error coming up during the dryer cycle means the condenser unit is blocked with fluff. To clean it correctly you will need to remove the rear half of the cabinet in order to access, remove and clean the unit. Have fun!*

    * If you call in a local expert they can do it easily for you. 💡

    November 3, 2016 at 11:30 pm #442397
    Mongoose57
    Participant

    Re: WJD1667W error code E20

    Already done that, along with most pipes. Oh and does any one know how to clear the error codes.

    November 4, 2016 at 8:43 am #442398
    Martin
    Participant

    Re: WJD1667W error code E20

    OK, so you’ve cleaned everything. How about the sensor in the condenser bottom hose?

    November 4, 2016 at 11:22 pm #442399
    Mongoose57
    Participant

    Re: WJD1667W error code E20

    Yep

    November 4, 2016 at 11:43 pm #442400
    adv
    Participant

    Re: WJD1667W error code E20

    âž¡ zanussi stuff not worth the hassle

    November 5, 2016 at 9:33 pm #442401
    Mongoose57
    Participant

    Re: WJD1667W error code E20

    Thanks for your help adv. if you have nothing constructive to add. Don’t bother saying anything.

    November 6, 2016 at 8:26 am #442402
    Martin
    Participant

    Re: WJD1667W error code E20

    Replacing that NTC will likely cure the error I would think.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.