Neff dishwasher cover

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Neff dishwasher cover

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • November 7, 2016 at 5:09 pm #89789
    Gordy29
    Participant

    Help if possible cover plate which locks in air break /metering tank.is there a tool to remove this.i want to replace it but I can’t shift it,scared of breaking it any advice please

    November 7, 2016 at 8:10 pm #442537
    electrofix
    Moderator

    Re: Neff dishwasher cover

    how about 2 things

    1 put the Enr number in the request so we know which neff unit you mean

    2 a picture with an arrow if possible pointing to the piece you need to remove

    Dave

    November 7, 2016 at 8:26 pm #442538
    keithwilliams
    Participant

    Re: Neff dishwasher cover

    I normally use my long nose pliers opened out and apply very gentle pressure until it starts to unscrew.

    November 8, 2016 at 7:46 am #442539
    Gordy29
    Participant

    Re: Neff dishwasher cover

    Thank you both. tried pliers. Enr s72t69x2gb/44. Part to be removed is bsh611314 thanks

    November 8, 2016 at 9:35 am #442540
    electrofix
    Moderator

    Re: Neff dishwasher cover

    oh i see what you mean now

    part unlocks by turning anti clockwise so i use 3 screwdrivers

    place 2 through 2 opposite hole ( not too deep. then holding the ends of the drivers with one hand use the third one as a lever to turn the unit to unlock it. dont just force it but gently apply pressure on and off till it gives

    its a bit of a juggling act but had done it a few times. have attached a graphic to give you the idea but its upside down so you just use it as a guide

    thanks to qualtex for the pic

    hope it helps

    Dave

    November 8, 2016 at 9:43 am #442541
    Martin
    Participant

    Re: Neff dishwasher cover

    Gordy29 wrote:Thank you both. tried pliers. Enr s72t69x2gb/44. Part to be removed is bsh611314 thanks

    Here’s the official service manual version of how to do……
    (Not got the ‘special tool’ huh?….. Then taper nose pliers will do 😉 )

    November 8, 2016 at 10:10 am #442542
    electrofix
    Moderator

    Re: Neff dishwasher cover

    its special tool time but it looks hexagonal
    so it must be a big allen key

    Dave

    November 8, 2016 at 9:35 pm #442543
    nomadPaul
    Participant

    Re: Neff dishwasher cover

    The special tool fits 3 separate nuts within the dishwasher. Its used to release the nut as shown in electrofix diagram by firing within the 6 triangular holes . It also fits the salt pot sealing nut and the small vent nut on the lower left hand side within the tub. Unfortunately, I don’t know the part number off the top of my head but I will try and find it.

    November 9, 2016 at 7:23 am #442544
    Gordy29
    Participant

    Re: Neff dishwasher cover

    Thank you for your help

    November 9, 2016 at 8:25 am #442545
    Martin
    Participant

    Re: Neff dishwasher cover

    Unfortunately, I don’t know the part number off the top of my head but I will try and find it.[/quote

    Shown in the manual photo I posted as: 341313

    November 9, 2016 at 2:20 pm #442546
    Martin
    Participant

    Re: Neff dishwasher cover

    Edit to my previous post, the part number has changed to 00342189, but to save you time looking it up, it is NLA. 🙁

    Ah well, taper nose pliers it is then. 😆

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.