reset procedure

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › reset procedure

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 8, 2016 at 2:31 pm #89802
    poples
    Participant

    hello we have a Bosch WAE24063GB/27 which has the rinse light flashing, we found the brushes needed replacing which we did how ever we can not find how to reset the machine all the reset procedures mention a spin button which this one does not have. Thought we would post on here and see if anyone can help

    thanks

    November 8, 2016 at 3:16 pm #442599
    Martin
    Participant

    Re: reset procedure

    No spin button then the procedure usually is :

    Press the Start button and rotate selector to the 11 o’clock position

    December 19, 2016 at 4:21 pm #442600
    trotter
    Participant

    Re: reset procedure

    Thanks Martin!!

    Did that (Rotated dial to position 15 pressed and held start button for three seconds and then turned it back to position number 3 which tests the motor).

    Another Bosch engineer helped me out but thought I would post reply to say thank you and in case someone else gets the problem on a Bosch that has no ‘spin’ option button 🙂

    December 19, 2016 at 4:55 pm #442601
    Martin
    Participant

    Re: reset procedure

    trotter wrote:Rotated dial to position 15 pressed and held start button for three seconds and then turned it back to position number 3 which tests the motor)

    So, just to clarify your post then ( as I get easily confused). Select position 15, then press and hold the Start button for 3 seconds, then turn it to position 3?

    I must now ask, which way do you rotate the dial? I’m thinking anti-clock? Otherwise you pass the off and in so doing you fook the process up…?

    Please clarify?

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.