Hotpoint WDL540P

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WDL540P

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • November 10, 2016 at 1:12 pm #89825
    rolf
    Participant

    Hope someone can help I’ve got a Hotpoint Washer dryer WDL540P that’s giving me right gyp.
    Error code lights 1,3 and 4 reading from bottom to top. f11 I believe no drain out. Changed pcb and pump.
    Set to drain it drains for second then stops even when full of water.
    IR readings ok.
    Thinking maybe pressure switch next but i’m running out of ideas, so any help would be much appreciated 😥

    November 10, 2016 at 5:53 pm #442676
    johnnyj
    Participant

    Re: Hotpoint WDL540P

    On holiday at present so can’t check 1St thing I would check is dryer thermistor and carbons.

    November 10, 2016 at 7:12 pm #442677
    rolf
    Participant

    Re: Hotpoint WDL540P

    Hope you enjoying your Holiday while I’m upto my eyes indeshit …..Carbons ok, had a look at the wires to thermistor that sometimes break all ok, tried it with thermistor unpluged.I did’nt pay anymore attention to the thermistor as it fills and washes just will not pump out apart from a one second burst.

    November 10, 2016 at 9:55 pm #442678
    HotDog
    Participant

    Re: Hotpoint WDL540P

    change the pressure switch olso there is a new up rated dryer thermister coloured white as the early black ones caused problems and you cannot test the machine with the thermister unplugged

    November 10, 2016 at 11:13 pm #442679
    rolf
    Participant

    Re: Hotpoint WDL540P

    Thanks that’s two nods towards a thermistor so I’ll get them ordered and let you know how i get on. Really appreciate the advice. Thankyou both.

    November 16, 2016 at 10:28 pm #442680
    rolf
    Participant

    Re: Hotpoint WDL540P

    Ok were back in action with this washer. I took both the pressure switch and thermistor with me but I only needed the thermistor so a big thumbs up to Johnnyj and hotdog. Thankyou so much guys, you got me out of dodge. 😀

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.