beko american fridge freezer

Home › Forums › Public Support Forums › General Enquiries And Questions › beko american fridge freezer

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • December 12, 2016 at 6:52 pm #90103
    grantplant
    Participant

    Hi,

    My American fridge freezer has stopped freezing. Digital display say it is working but is definitely defrosting. Can you help!

    December 12, 2016 at 9:49 pm #443711
    SAMURI
    Participant

    Re: beko american fridge freezer

    The model number is required to advise better.

    But most Beko American type if the compressor is running it may be the fan faulty.

    If it is silent and not running then most likely the main pcb faulty.

    Bob

    December 13, 2016 at 11:22 am #443712
    grantplant
    Participant

    Re: beko american fridge freezer

    Hi the model number is GNE V321APX. It looks like the bottom of the freezer was still frozen but thawing further up. Could just be because heat rises so this went first?

    Any help greatly appreciated.

    December 13, 2016 at 9:03 pm #443713
    SAMURI
    Participant

    Re: beko american fridge freezer

    It may be the fan in the freezer.

    Bob

    December 14, 2016 at 6:25 am #443714
    grantplant
    Participant

    Re: beko american fridge freezer

    Thanks bob. Do you where I access this

    December 14, 2016 at 8:41 pm #443715
    SAMURI
    Participant

    Re: beko american fridge freezer

    Behind the top rear panel inside the freezer compartment.

    Bob

    December 14, 2016 at 8:53 pm #443716
    SAMURI
    Participant

    Re: beko american fridge freezer

    To check the fan when the compressor is running you can open the freezer door and press and hold the light switch.

    If the fan does not cut in within about 60 seconds the fan is most likely faulty.

    You will have to disconnect and remove the Icemaker to gain access to the rear panel.

    Bob

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.