- This topic has 5 replies, 2 voices, and was last updated 9 years, 3 months ago by
.
-
Posts
-
Model ZDT6252..pnc 911847023/01
Control module is part number 1524840616.
Masterpart still have it listed but it is out of stock. Checking on the official Zanussi spares site that part cannot be found.
If I enter the pnc number then I get six pages of parts but the module is not there. Does that mean it has been made obsolete?Jim.
Re: Zanussi D/W module?
Oh dear, one very dischuffed customer, they have just had a new stone flagged floor fitted right up to this dishwasher without removing it first, a big hammer will be needed to remove it. 🙁
Re: Zanussi D/W module?
Oh dear, one very dischuffed customer, they have just had a new stone flagged floor fitted right up to this dishwasher without removing it first, a big hammer will be needed to remove it. 🙁
Been there, done that – silly people.
What’s the problem with the module? Can it be repaired?
Re: Zanussi D/W module?
Strange one TBH, not seen this happen before, mainly been heater relay contact problems.
Door switch and door latch both fine, switch on and the power light comes on above the pcb but none of the buttons have any effect, no other lights come on.
Customer says it has been like this for a while now but occasionally will work and complete the cycle perfectly. ❓
I couldn’t get it to come on at all.
- You must be logged in to reply to this topic.